Each door weighs 925 lbs and measure
5' in diameter.  They are off of double ended retorts from the original canning line here at the cannery.  These doors could be utilized in several different applications.

The Following retorts are also for sale however please contact me about the asbestos that will need removed before the cylinder units can be staged for shipping

6 Reid Boiler Works double-ended set up for trays, horizontal
Asbestos insulation, C/W Taylor valves,

#1 1949 date, #2196

#2 1949 date, #2197

#3 1949 date, #2198

#4 1949 date, #2199

#5 1949 date, #2200

#6 1949 date, #2201
last used in 1997 to can salmon, still in excellent condition.
working pressure rated for retorts is 30 psi as that is what all the gauges go to on each one however all paperwork on units with boilers state psi should maintain between 90-120 psi
steam supply boiler operating pressure: 125psi, header size:4”
vent valves size : 3” type gate
air supply: top center air valve size: 1” type globe
drain location bottom 3”

1 #1 Seattle Boiler Works, model HPT1650, s/n L-50971-1, date
1983 with oil burner, model F16-075,
3 pass firetube boiler
national board # 1816
year 1983
Last inspected June 1998
this boiler was used with retorts seen above.
Manual available
300 h.p.
150 psig

1 #2 Seattle Boiler Works, model HPT -1650, s/n L-50971-2
national board # 1817
Year built 1983
last inspected 6-98
300 h.p.
150 psig
manual available

1 #3 Seattle Boiler Works, HPT-550
3 pass scotch boiler
national board # 1678
s/n# L-40563-1
Design Pressure 220 PSIG
Operating Pressure 150 PSIG
CAPACITY 100 HOP
The boiler completely rebuilt in 1988 and includes a Johnson oil burner Model # DHF-100 A4S (M) S/N 288902
manual available